How to Properly Load Your Dishwasher

Any dishwasher owner will tell you how great dishwashers are at saving time and effort, and many will agree that this appliance is a staple in any kitchen. And while dishwashers are beneficial and can save time, effort, water, and money in the long-run, some of us may not load our dishwashers properly, and we may not, therefore, get the most out of them.

This guide will educate dishwasher users on how to properly load a dishwasher, offering tips and guidance to get the most out of this essential appliance. These methods can help save room and can allow the dishwasher to clean dishes to the best of its ability.

How to Properly Load Dishwasher

How to Properly Load Your Dishwasher

Scrape off any food debris

Before loading the dishwasher, it’s important to remove any large bits of food debris (leftovers, bones, rice, peelings or corn-cobs etc.) by scraping them into the bin or garbage disposal unit.

Pre-rinse dishes, but only if the cycle isn’t running just yet

Pre-rinsing is only necessary if your dishwasher isn’t cleaning them as efficiently, or if you’re not running the cycle straight away. You don’t want dishes to sit around for hours as the food can harden, making it more difficult to remove, and it can create an unpleasant odor.

However, many argue that detergents actually work better when they have food to remove, and pre-rinsing is believed to waste more than 6,000 gallons of water per household each year.

Securely fit the plates into the bottom rack slots

Make sure the plates are facing inwards so the spray can reach them and clean them, and the slots are measured so that each plate can be cleaned efficiently, so don’t try to place plates in between the slots.

Place pots, pans, and deeper dishes on the bottom rack, making sure they’re faced down

Pots, pans, and deeper dishes should be faced down so that the insides are cleaned effectively.

It’s important to know your limits and not try to overload them, or they won’t clean properly.

Some people prefer to wash pots and pans by hand if there are too many to fit in the dishwasher.

Chopping boards should be placed on the outside of the bottom rack

If there’s room in the plate slots then chopping boards can be placed there, but if not they should be slotted on the outside of the bottom rack standing up.

Some chopping boards aren’t designed for dishwasher use, and some can be damaged by heat, which is why some people prefer to wash them by hand.

Put all cutlery into the cutlery basket provided

Dishwashers provide a basket, especially for cutlery, and here they should be placed handle-down with enough space between them for the water to distribute evenly. There are different compartments for knives, forks and spoons, and many have a specific section for teaspoons.

Longer utensils and sharp knives should lay down flat on the top rack

Sharp knives and forks can become a hazard when faced up in the cutlery basket, which is why they may be best laid flat on the top rack. You should hand wash good kitchen knives to prevent damage, especially if they have wooden or laminated handles.

Likewise, larger utensils such as spatulas or ladles can block the spray and interfere with the dishwasher’s features, so they should also be laid flat on the top rack.

Place any bowls, mugs, and glasses on the top rack

The top rack is designed so bowls, mugs, and glasses can easily be slotted face-down. This allows the insides to be cleaned effectively, and it also means that they can drain well.

Put any plastic items or Tupperware on the top rack

The heat from the dishwasher could melt plastic if placed on the bottom rack, which is why it’s important to slot them onto the top shelf faced down. This also allows them to drain just like the bowls, mugs, and glasses.

Fill the soap container with a detergent of your choice

Whether you prefer tablets, powder or liquid detergent, you must fill the allocated container before. Some dishwashers have 2 soap containers, but it isn’t always necessary to fill this one as well.

Unless your dishes are very dirty, you might be better off just filling one of the containers, or using a lower, equal amount in both. This will make the detergent last longer.

  1. If your dishwasher has a rinse aid feature then fill this part with the rinse agent until you reach the marker

Some dishwashers are fitted with a feature for rinse agents such as vinegar or ‘Jet-Dry’, and this can be found out in the dishwasher manual or labels. However, this feature is generally unnecessary if your water is naturally soft anyway, or if you already use a water softener.

  1. Close the dishwasher door and following your specific dishwasher’s instructions to run the cycle

After you’ve closed the soap container, you can now close the dishwasher door and begin your cycle. Dishwashers are different, and the instructions depend on your make, but there’s usually a dial to select the cycle type and a start button. There are often different cycles to choose from, but users often just select a ‘normal cycle’.

Properly Load Your Dishwasher

Extra Tips on How to Properly Load a Dishwasher

  • Load the dishwasher with dishwasher-friendly items only – Some materials such as wood, stainless steel or cast iron cannot be put in the dishwasher, so it’s important to check labels first.
  • Don’t overload your dishwasher – If the dishwasher is jam-packed, then nothing will clean properly as the spray won’t be able to reach everywhere.
  • Don’t stack items – Stacking dishes will prevent them from being cleaned properly, and the spray won’t be able to reach them
  • Don’t place fragile, breakable items next to each other – The vibrations from the dishwasher can cause friction, allowing them to break easily.
  • Only pre-rinse if you need to – If you’re about to run the cycle anyway, you don’t need to pre-rinse the dishes.
  • Some suggest running hot water into your sink before running the dishwasher cycle – Although dishwashers heat the water up well, they may run better and clean more effectively if the water is already hot.
  • If your sink has a garbage disposal, it might be wise to run this before running the dishwasher cycle – As many dishwashers drain into the same pipe as the sink, it’s important to clear that pipe. If you don’t have a disposal unit, you could use a strainer to catch any debris.
  • Don’t stock up on detergent – While dishwasher detergents are good, they need to be reasonably fresh, and it’s advised that you only buy 2-months-worth at a time.
  • Store your dishwasher detergent properly – Detergent should be stored in a cool, dry place. Otherwise, it can get clumpy and start to deteriorate.
  • Learning the proper way of loading a dishwasher is just one thing, choosing the right wash cycle is another – make sure to select the right cycle for your dirty dishes based on your personal needs.






Leave a Reply

Your email address will not be published. Required fields are marked *

donnalove is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising & linking to Amazon properties. Simply as an Amazon Associate, we earn from qualifying purchases.